Breadcrumb

Equipment App Advertizing

EQUIPMENT SELECTOR

Find the optimal equipment in 3 steps

Specialty Gas Equipment Selector

Our specialty gas equipment app supports you in finding suitable products to withdraw gases from their containers. The optimal product for your specific demands will be selected by only a few clicks.

HardwareSelector

Step 1
Step 2
Step 3
Result
Which type of gas is used?
Inert, Flammable and Oxidizing
Nitrogen, Methane, Oxygen
Corrosive and Toxic
Hydrogen Chloride, Ammonia
Liquified
Carbon Dioxide, Propane
Quality > 6.0
Electronic Specialty Gases
Step 1
Step 2
Step 3
Result
Back
Reset
What kind of gas supply?
Single Cylinder
Central Gas Supply
Step 1
Step 2
Step 3
Result
Back
Reset
Requirements for outlet pressure?
Single Stage Regulator
Double Stage Regulator
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Regulators

Spectrolab Pressure Regulator FM51
FM51
Spectrolab Cylinder pressure regulator FM45
FM45

Accessories

Spectrolab Flowmeter FLM 32
FLM32
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Regulators

Spectrolab Cylinder pressure regulator FM53
FM53
Spectrolab Cylinder pressure regulator FM52 exact
FM52

Accesosories

Spectrolab Flowmeter FLM 32
FLM32
Step 1
Step 2
Step 3
Result
Back
Reset
What kind of Pressure Control Panel is used?
Pressure control panel for single cylinder
Pressure control panel for 2 x 1 cylinders
How do you switch between cylinders?
Manual
Automatic
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Control Panel

Spectrolab Pressure control panel BM55-1
BM55-1
Spectrolab Pressure control panel BM56-1
BM56-1

Tapping Points

Spectrolab Point of use EM55-1...4
EM55-1...4
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Control Panel

Spectrolab Pressure control panel BM55-2
BM55-2

Tapping Points

Spectrolab Point of use EM55-1...4
EM55-1...4

Accessories

Spectrolab Extensions BM55+56-E
BM55+56-E
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Control Panel

Spectrolab Pressure control panel BM55-2U
BM55-2U
Spectrolab Pressure control panel BM55-2A
BM55-2A
Spectrolab Pressure control panel BM56-2U
BM56-2U

Tapping Points

Spectrolab Point of use EM55-1...4
EM55-1...4

Accessories

Spectrolab Extensions BM55+56-E
BM55+56-E
Step 1
Step 2
Step 3
Result
Back
Reset
What kind of gas supply?
Single Cylinder
Central Gas Supply
Step 1
Step 2
Step 3
Result
Back
Reset
Requirements for outlet pressure?
Single Stage Regulator
Double Stage Regulator
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Regulators

Spectrocem Cylinder pressure regulator FE51
FE51
Spectrocem Cylinder pressure regulator FE51-SP
FE51-SP
Spectrocem Cylinder pressure regulator FE45
FE45
Spectrocem Cylinder pressure regulator FE121
FE121
Spectrocem Purge- and connection block SBE3
SBE3
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Regulators

Spectrocem Cylinder pressure regulator FE53
FE53
Spectrocem Cylinder pressure regulator FE52 exact
FE52

Accessories

Spectrocem Purge- and connection block SBE3
SBE3
Step 1
Step 2
Step 3
Result
Back
Reset
What kind of pressure control panel is used?
Pressure control panel for single cylinder
Pressure control panel for 2 x 1 cylinder
How do you switch between cylinders?
Manual
Automatic
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Control Panel

Spectrocem Pressure control panel BE55-1
BE55-1
Spectrocem Pressure control panel BE56-1
BE56-1

Tapping Points

Spectrocem Tapping points EE55-1...4
EE55-1...4

Accessories

Spectrocem Purge- and connection block SBE3
SBE3
Spectrocem High pressure panel BE50-1
BE50-1
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Control Panel

Spectrocem Pressure control panel BE55-2
BE55-2
Spectrocem Pressure control panel BE56-2
BE56-2

Tapping Points

Spectrocem Tapping points EE55-1...4
EE55-1...4
Spectrocem High pressure panel BE50-2
BE50-2

Accessories

Spectrocem Purge- and connection block SBE3
SBE3
Spectrocem Extensions BE55+56-E
BE55+56-E
Spectrocem Purge units BE55+56-SP
BE55+56-SP
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Control Panel

Spectrocem Pressure control panel BE55-2U
BE55-2U
Spectrocem Pressure control panel BE56-2U
BE56-2U

Tapping Points

Spectrocem Tapping points EE55-1...4
EE55-1...4
Spectrocem High pressure panel BE50-2
BE50-2

Accessories

Spectrocem Purge- and connection block SBE3
SBE3
Spectrocem Extensions BE55+56-E
BE55+56-E
Spectrocem Purge units BE55+56-SP
BE55+56-SP
Step 1
Step 2
Step 3
Result
Back
Reset
What kind of gas supply?
Single Cylinder
Central Gas Supply
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Regulator

Spectrocem Cylinder pressure regulator FE121
FE121
Spectrocem Control valve RV6E
RV6E
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure Control Panel

Spectrocem Pressure control panel SE45/55/125
SE45/55/125
Spectrocem Control valve RV6E
RV6E

Tapping Points

Spectrocem Tapping points EE55-1...4
EE55-1...4
Step 1
Step 2
Step 3
Result
Back
Reset
What kind of pressure control panel ist used?
Pressure control panel for single cylinder
Pressure control panel for 2 x 1 cylinder
How do you swith between the cylinder?
Manual
Automatic
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure control panel

Spectropur Pressure control panel BE55/56-1-VCR
BE55/56-1-VCR
Spectropur Pressure control panel SP3
SP3
Spectropur Pressure control panel SP4
SP4
Spectropur Pressure control panel SP6
SP6

Tapping points

Spectropur Tapping point EE55-1-VCR
EE55-1-VCR
Spectropur Point of use stick EES55-1-VCR
EES55-1-VCR

Accessories

Spectropur Purge block SBE3
SBE3 (Spectropur)
Spectropur Purge- and connection block SBE/3-MV3
SBE/3-MV3
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure control panel

Spectropur Pressure control panel BE55/56-2-VCR
BE55/56-2-VCR

Tapping points

Spectropur Tapping point EE55-1-VCR
EE55-1-VCR
Spectropur Point of use stick EES55-1-VCR
EES55-1-VCR

Accessories

Spectropur Purge block SBE3
SBE3 (Spectropur)
Spectropur Purge- and connection block SBE/3-MV3
SBE/3-MV3
Step 1
Step 2
Step 3
Result
Back
Reset

Your Product Recommendation

Pressure control panel

Spectropur Pressure control panel BE55/56-2U-VCR
BE55/56-2U-VCR

Tapping points

Spectropur Tapping point EE55-1-VCR
EE55-1-VCR
Spectropur Point of use stick EES55-1-VCR
EES55-1-VCR

Accessories

Spectropur Purge block SBE3
SBE3 (Spectropur)
Spectropur Purge- and connection block SBE/3-MV3
SBE/3-MV3
Spectrolab Pressure Regulator FM51
Product features
  • Brass (chrome plated) cylinder pressure regulator
  • For non-corrosive gases and gas mixtures up to quality 6.0
  • 6 ports for flexible and individual configuration
  • Very stable outlet pressure
  • Suitable for inlet pressures up to 4350 psi
  • Max. outlet pressures 22 up to 2900 psi
  • Metal-to-metal seal to atmosphere
  • Suitable for ECD-applications
  • Pressure regulator can be evacuated
  • Inlet filter
  • Approved for the use with oxygen
  • Simple outlet pressure limitation by hand wheel
  • Easy to install
  • New laboratory-style design
  • Ergonomically designed
Spectrolab Pressure Regulator FM51
Back to product selection
Datasheet
Product request
Spectrolab Cylinder pressure regulator FM45
Product features
  • Single-stage cylinder pressure regulator with compensated main valve for improved performance
  • Simple and safe gas withdrawal from gas cylinders, for non-corrosive gases and gas mixtures up to quality 6.0
  • Compensated main valve for significantly improved outlet pressure accuracy similar to a dual-stage regulator
  • Compact design, lightweight
  • New laboratory-style design
  • Suitable for ECD-applications
  • High control accuracy
  • Integrated relief valve
  • Hastelloy-diaphragm
  • Minimised gas-wetted surface
  • Manual cylinder connection (for non-metal-to-metal sealing cylinder connections)
Spectrolab Cylinder pressure regulator FM45
Back to product selection
Datasheet
Product request
Spectrolab Flowmeter FLM 32
Product features
  • Flowmeter for use on pressure regulators with inert high-purity gases up to quality 6.0 for exact adjustment and indication of the flow rate
  • Laboratory-style design
  • Compact design
  • Ergonomically designed
  • Integrated Dosing Valve
Spectrolab Flowmeter FLM 32
Back to product selection
Datasheet
Product request
Spectrolab Cylinder pressure regulator FM53
Product features
  • 2-stage diaphragm cylinder pressure regulator with extremely stable outlet pressure and anti-vibration device
  • For non-corrosive gases and gas mixtures up to quality 6.0
  • 6 ports for flexible and individual configuration
  • New laboratory-style design
  • Central filter
  • Suitable for ECD-applications
  • Pressure regulator can be evacuated
  • Suitable for inlet pressures up to 300 bar
  • Max. outlet pressures 1,5 up to 20 bar
  • Light weight
  • Compact design
  • Approved for use with oxygen
  • Simple outlet pressure limitation by handwheel
  • Easy to install
Spectrolab Cylinder pressure regulator FM53
Back to product selection
Datasheet
Product request
Spectrolab Cylinder pressure regulator FM52 exact
Product features
  • Brass (chrome plated) cylinder pressure regulator
  • Extremely stable outlet pressure by applied extremely accurate Technology exact and anti-vibration device
  • For non-corrosive gases and gas mixtures up to quality 6.0
  • 6 ports for flexible and individual configuration
  • Suitable for inlet pressures up to 300 bar
  • Max. outlet pressures 1,5 up to 20 bar
  • Lightweight
  • Compact design
  • Metal-to-metal seal to atmosphere
  • Suitable for ECD-applications
  • Pressure regulator can be evacuated
  • Central filter
  • Approved for use with oxygen
  • Simple outlet pressure limitation by handwheel
  • Easy to install
  • New laboratory-style design
Spectrolab Cylinder pressure regulator FM52 exact
Back to product selection
Datasheet
Product request
Spectrolab Flowmeter FLM 32
Product features
  • Flowmeter for use on pressure regulators with inert high-purity gases up to quality 6.0 for exact adjustment and indication of the flow rate
  • Laboratory-style design
  • Compact design
  • Ergonomically designed
  • Integrated Dosing Valve
Spectrolab Flowmeter FLM 32
Back to product selection
Datasheet
Product request
Spectrolab Pressure control panel BM55-1
Product features
  • Wall- and cabinet-mounting pressure control panels
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2, 3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Diaphragm-type pressure regulator with high control accuracy and anti-vibration device
  • Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the outlet piping from draining during disconnecting the panel)
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 4350 psi
  • Compact design especially for installation into safety cabinets for gas cylinders
  • Double-stage model: BM56-1
Spectrolab Pressure control panel BM55-1
Back to product selection
Datasheet
Product request
Spectrolab Pressure control panel BM56-1
Product features
  • Double-stage wall- and cabinet-mounting pressure control panels
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2, 3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Double-stage diaphragm-type pressure regulator with high control accuracy and anti-vibration device
  • Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the outlet piping from draining during disconnecting the panel)
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
  • Compact design especially for installation into safety cabinets for gas cylinders
  • Single-stage model: BM55-1
Spectrolab Pressure control panel BM56-1
Back to product selection
Datasheet
Product request
Spectrolab Point of use EM55-1...4
Product features
  • Wall-mounting Point of use
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Regulator with high control accuracy
  • Designed for easy installation
  • Approved for use with oxygen
  • Point of use can be extended into multiple tapping points
  • Top-inlet or bottom-inlet configurations available
Spectrolab Point of use EM55-1...4
Back to product selection
Datasheet
Product request
Spectrolab Pressure control panel BM55-2
Product features
  • Wall- and cabinet-mounting pressure control panels
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2, 3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Diaphragm-type pressure regulator with high control accuracy and anti-vibration device
  • Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the outlet piping from draining during disconnecting the panel)
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
  • Compact design especially for installation into safety cabinets for gas cylinders
  • Double-stage model: BM56-2
Spectrolab Pressure control panel BM55-2
Back to product selection
Datasheet
Product request
Spectrolab Point of use EM55-1...4
Product features
  • Wall-mounting Point of use
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Regulator with high control accuracy
  • Designed for easy installation
  • Approved for use with oxygen
  • Point of use can be extended into multiple tapping points
  • Top-inlet or bottom-inlet configurations available
Spectrolab Point of use EM55-1...4
Back to product selection
Datasheet
Product request
Spectrolab Extensions BM55+56-E
Product features
  • Extension modules for pressure control panels Spectrolab BM55 and BM56 series
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Designed for easy installation
  • Filter at the inlet of the individual extension modules
Spectrolab Extensions BM55+56-E
Back to product selection
Datasheet
Product request
Spectrolab Pressure control panel BM55-2U
Product features
  • Wall- and cabinet-mounting pressure control panels with automatic change-over function
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2x2, 2x3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Diaphragm-type pressure regulator with high control accuracy and anti-vibration device
  • Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the outlet piping from draining during disconnecting the panel)
  • Designed for easy installation
  • Approved for use with oxygen
  • Compact design especially for installation into safety cabinets for gas cylinders
  • Minimised pressure difference between left and right hand side outlet pressure
  • Double-stage model: BE56-2U
Spectrolab Pressure control panel BM55-2U
Back to product selection
Datasheet
Product request
Spectrolab Pressure control panel BM55-2A
Product features
  • Wall- and cabinet-mounting pressure control panels with fully automatic change-over function
  • For non-corrosive gases up to quality 5.0
  • Simple outlet pressure adjustment
  • Minimised pressure difference between left and right-hand side outlet pressure due to Ambimat
  • Maximum emptying of gas cylinders
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2x2, 2x3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Regulator with high control accuracy and integrated relief valve
  • Designed for easy installation
  • Tested for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
  • Compact design especially for installation into safety cabinets for gas cylinders
  • You can order the Ambimat pressure control panel for five different outlet pressure ranges: 10 / 20 / 50 / 100 / 200 bar
  • The change-over pressure must always be above the minimum outlet pressure to make sure that pressure regulation is possible.
Spectrolab Pressure control panel BM55-2A
Back to product selection
Datasheet
Product request
Spectrolab Pressure control panel BM56-2U
Product features
  • Double-stage wall- and cabinet-mounting pressure control panels with automatic change-over function
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2x2, 2x3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimized for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Double stage pressure control with 3 diaphragm-type pressure regulators with high control accuracy, anti-vibration device, and integrated relief valve
  • Designed for easy installation
  • Approved for use with oxygen
  • Compact design especially for installation into safety cabinets for gas cylinders
  • Minimized pressure difference between left and right-hand side outlet pressure
  • Single-stage model: BE55-2U
Spectrolab Pressure control panel BM56-2U
Back to product selection
Datasheet
Product request
Spectrolab Point of use EM55-1...4
Product features
  • Wall-mounting Point of use
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Regulator with high control accuracy
  • Designed for easy installation
  • Approved for use with oxygen
  • Point of use can be extended into multiple tapping points
  • Top-inlet or bottom-inlet configurations available
Spectrolab Point of use EM55-1...4
Back to product selection
Datasheet
Product request
Spectrolab Extensions BM55+56-E
Product features
  • Extension modules for pressure control panels Spectrolab BM55 and BM56 series
  • For non-corrosive gases up to quality 6.0
  • Laboratory-style design
  • Designed for easy installation
  • Filter at the inlet of the individual extension modules
Spectrolab Extensions BM55+56-E
Back to product selection
Datasheet
Product request
Spectrocem Cylinder pressure regulator FE51
Product features
  • Stainless steel cylinder pressure regulator
  • Pressure regulator with very stable outlet pressure and anti-vibration device
  • For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0
  • 6 ports for flexible and individual configuration
  • Suitable for inlet pressures up to 300 bar
  • Max. outlet pressures 1,5 up to 200 bar
  • Metal-to-metal seal to atmosphere
  • Suitable for ECD-applications
  • Pressure regulator can be evacuated
  • Inlet filter
  • Approved for use with oxygen
  • Simple outlet pressure limitation by handwheel
  • Easy to install
  • New laboratory-style design
Spectrocem Cylinder pressure regulator FE51
Back to product selection
Datasheet
Product request
Spectrocem Cylinder pressure regulator FE51-SP
Product features
  • Stainless steel cylinder pressure regulator with purge valves for process gas or purge gas purging
  • Pressure regulator with very stable outlet pressure and anti-vibration device
  • For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0
  • Purge valves in 3 different configurations available
  • Suitable for inlet pressures up to 200 bar
  • Max. outlet pressures 1,5 up to 200 bar
  • Metal-to-metal seal to atmosphere
  • Suitable for ECD-applications
  • Pressure regulator can be evacuated
  • Inlet filter
  • Approved for use with oxygen
  • Simple outlet pressure limitation by handwheel
  • Easy to install
  • New laboratory-style design
Spectrocem Cylinder pressure regulator FE51-SP
Back to product selection
Datasheet
Product request
Spectrocem Cylinder pressure regulator FE45
Product features
  • Single-stage cylinder pressure regulator with compensated main valve for improved performance
  • Simple and safe gas withdrawal from gas cylinders, for corrosive gases and gas mixtures up to quality 6.0
  • Compensated main valve for significantly improved outlet pressure accuracy similar to a dual-stage regulator
  • Compact design, light weight
  • New laboratory-style design
  • Ergonomically designed
  • Suitable for ECD-applications
  • High control accuracy
  • Integrated relief valve
  • Hastelloy-diaphragm
  • Minimised gas-wetted surface
  • Manual cylinder connection (for non-metal-to-metal sealing cylinder connections)
Spectrocem Cylinder pressure regulator FE45
Back to product selection
Datasheet
Product request
Spectrocem Cylinder pressure regulator FE121
Product features
  • Single-stage cylinder pressure regulator
  • Simple and safe gas withdrawal from gas cylinders, for corrosive gases and gas mixtures up to quality 6.0 up to 25 bar vapour pressure
  • For corrosive gases and gas mixtures with >1% corrosive components we recommend the use of a purging device (FE 121 SP)
  • New laboratory-style design
  • Ergonomically designed
  • Filter at the regulator inlet
  • High control accuracy due to large diaphragm
  • Integrated relief valve
  • Available with purge device FE 121 SP
  • Simple outlet pressure limitation by handwheel
  • Powder-coated bonnet
Spectrocem Cylinder pressure regulator FE121
Back to product selection
Datasheet
Product request
Spectrocem Purge- and connection block SBE3
Product features
  • Purge- and connection block for use with high-purity, strongly corrosive or toxic gases in combination with an inert gas purge arrangement
  • Minimised purge volume of only 1,4 cm³
  • With integrated capillary tube (very short purge cycles)
  • Contaminated purge gas can be vented through waste gas valve without entering the downstream system
  • With non-return valve at the purge gas inlet and compression ring fittings
  • Available with pneumatic actuators (optional)
  • Available with pressure gauge (for low vapour pressure gases), pressure regulator (mounted onto the purge block) or for use with a pressure control panel (with pigtail)
  • Suitable for ECD applications
Spectrocem Purge- and connection block SBE3
Back to product selection
Datasheet
Product request
Spectrocem Cylinder pressure regulator FE53
Product features
  • 2-stage stainless steel cylinder pressure regulator with extremely stable outlet pressure and anti-vibration device
  • For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0
  • 6 ports for flexible and individual configuration
  • New laboratory-style design
  • Central filter
  • Suitable for ECD-applications
  • Pressure regulator can be evacuated
  • Suitable for inlet pressures up to 300 bar
  • Max. outlet pressures 1,5 up to 20 bar
  • Lightweight
  • Compact design
  • Approved for use with oxygen
  • Simple outlet pressure limitation by handwheel
  • Easy to install
Spectrocem Cylinder pressure regulator FE53
Back to product selection
Datasheet
Product request
Spectrocem Cylinder pressure regulator FE52 exact
Product features
  • Stainless steel cylinder pressure regulator
  • Extremely stable outlet pressure by applied extremely accurate technology and anti-vibration device
  • For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0
  • 6 ports for flexible and individual configuration
  • Suitable for inlet pressures up to 300 bar
  • Max. outlet pressures 1.5 up to 20 bar
  • Lightweight
  • Compact design
  • Metal-to-metal seal to atmosphere
  • Suitable for ECD-applications
  • Pressure regulator can be evacuated
  • Central filter
  • Approved for use with oxygen
  • Simple outlet pressure limitation by handwheel
  • Easy to install
  • New laboratory-style design
Spectrocem Cylinder pressure regulator FE52 exact
Back to product selection
Datasheet
Product request
Spectrocem Purge- and connection block SBE3
Product features
  • Purge- and connection block for use with high-purity, strongly corrosive or toxic gases in combination with an inert gas purge arrangement
  • Minimised purge volume of only 1,4 cm³
  • With integrated capillary tube (very short purge cycles)
  • Contaminated purge gas can be vented through waste gas valve without entering the downstream system
  • With non-return valve at the purge gas inlet and compression ring fittings
  • Available with pneumatic actuators (optional)
  • Available with pressure gauge (for low vapour pressure gases), pressure regulator (mounted onto the purge block) or for use with a pressure control panel (with pigtail)
  • Suitable for ECD applications
Spectrocem Purge- and connection block SBE3
Back to product selection
Datasheet
Product request
Spectrocem Pressure control panel BE55-1
Product features
  • Wall- and cabinet-mounting stainless steel pressure control panels
  • For corrosive gases and gas mixtures with corrosive components up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2, 3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Diaphragm-type pressure regulator with high control accuracy and anti-vibration device
  • Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the outlet piping from draining during disconnecting the panel)
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
  • Double-stage model: BE56-1
Spectrocem Pressure control panel BE55-1
Back to product selection
Datasheet
Product request
Spectrocem Pressure control panel BE56-1
Product features
  • Double-stage wall- and cabinet-mounting stainless steel pressure control panels
  • For corrosive gases and gas mixtures with corrosive components up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2, 3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Double stage diaphragm-type pressure regulator with high control accuracy and anti-vibration device
  • Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the outlet piping from draining during disconnecting the panel)
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
  • Single-stage model: BE55-1
Spectrocem Pressure control panel BE56-1
Back to product selection
Datasheet
Product request
Spectrocem Tapping points EE55-1...4
Product features
  • Wall-mounting tapping points / outlet points
  • For corrosive and toxic gases and gas mixtures up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Regulator with high control accuracy and Hastelloy-diaphragm
  • Designed for easy installation
  • Approved for use with oxygen
  • Tapping point can be extended into multiple tapping points
  • Gas supply from top or bottom
Spectrocem Tapping points EE55-1...4
Back to product selection
Datasheet
Product request
Spectrocem Purge- and connection block SBE3
Product features
  • Purge- and connection block for use with high-purity, strongly corrosive or toxic gases in combination with an inert gas purge arrangement
  • Minimised purge volume of only 1,4 cm³
  • With integrated capillary tube (very short purge cycles)
  • Contaminated purge gas can be vented through waste gas valve without entering the downstream system
  • With non-return valve at the purge gas inlet and compression ring fittings
  • Available with pneumatic actuators (optional)
  • Available with pressure gauge (for low vapour pressure gases), pressure regulator (mounted onto the purge block) or for use with a pressure control panel (with pigtail)
  • Suitable for ECD applications
Spectrocem Purge- and connection block SBE3
Back to product selection
Datasheet
Product request
Spectrocem High pressure panel BE50-1
Product features
  • Wall- and cabinet-mounting stainless steel high pressure panels
  • For corrosive gases and gas mixtures with corrosive components up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2, 3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Pressure gauge (optional)
  • Suitable for ECD-applications
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
Spectrocem High pressure panel BE50-1
Back to product selection
Datasheet
Product request
Spectrocem Pressure control panel BE55-2
Product features
  • Wall- and cabinet-mounting stainless steel pressure control panels
  • For corrosive gases and gas mixtures with corrosive components up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2x2, 2x3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Diaphragm-type pressure regulator with high control accuracy and anti-vibration device
  • Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the outlet piping from draining during disconnecting the panel)
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
  • Double-stage model: BE56-2
Spectrocem Pressure control panel BE55-2
Back to product selection
Datasheet
Product request
Spectrocem Pressure control panel BE56-2
Product features
  • Double-stage wall- and cabinet-mounting stainless steel pressure control panels
  • For corrosive gases and gas mixtures with corrosive components up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2x2, 2x3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Double-stage diaphragm-type pressure regulator with high control accuracy and anti-vibration device
  • Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the outlet piping from draining during disconnecting the panel)
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
  • Single-stage model: BE55-2
Spectrocem Pressure control panel BE56-2
Back to product selection
Datasheet
Product request
Spectrocem Tapping points EE55-1...4
Product features
  • Wall-mounting tapping points / outlet points
  • For corrosive and toxic gases and gas mixtures up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Regulator with high control accuracy and Hastelloy-diaphragm
  • Designed for easy installation
  • Approved for use with oxygen
  • Tapping point can be extended into multiple tapping points
  • Gas supply from top or bottom
Spectrocem Tapping points EE55-1...4
Back to product selection
Datasheet
Product request
Spectrocem High pressure panel BE50-2
Product features
  • Wall- and cabinet-mounting stainless steel high pressure panels
  • For corrosive gases and gas mixtures with corrosive components up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2, 3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Pressure gauge (optional)
  • Suitable for ECD-applications
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
Spectrocem High pressure panel BE50-2
Back to product selection
Datasheet
Product request
Spectrocem Purge- and connection block SBE3
Product features
  • Purge- and connection block for use with high-purity, strongly corrosive or toxic gases in combination with an inert gas purge arrangement
  • Minimised purge volume of only 1,4 cm³
  • With integrated capillary tube (very short purge cycles)
  • Contaminated purge gas can be vented through waste gas valve without entering the downstream system
  • With non-return valve at the purge gas inlet and compression ring fittings
  • Available with pneumatic actuators (optional)
  • Available with pressure gauge (for low vapour pressure gases), pressure regulator (mounted onto the purge block) or for use with a pressure control panel (with pigtail)
  • Suitable for ECD applications
Spectrocem Purge- and connection block SBE3
Back to product selection
Datasheet
Product request
Spectrocem Extensions BE55+56-E
Product features
  • Extension modules for Spectrocem BE55 and 56 series pressure control panels
  • Laboratory-style design
  • Designed for easy installation
  • With filter at the inlet of the individual extension modules
Spectrocem Extensions BE55+56-E
Back to product selection
Datasheet
Product request
Spectrocem Purge units BE55+56-SP
Product features
  • Extension modules for purging with inert gas in Spectrocem BE55 and 56 series pressure control panels
  • Non-return valve in the inlet
  • Filter in the in- and outlet
  • Laboratory-style design
  • Handwheel with on/off position indicator
Spectrocem Purge units BE55+56-SP
Back to product selection
Datasheet
Product request
Spectrocem Pressure control panel BE55-2U
Product features
  • Wall- and cabinet-mounting stainless steel pressure control panels with automatic change-over function
  • For corrosive gases and gas mixtures with corrosive components up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2x2, 2x3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Diaphragm-type pressure regulator with high control accuracy and anti-vibration device
  • Outlet adapter with integrated relief valve and optional diaphragm-shut-off valve (this prevents the outlet piping from draining during disconnecting the panel)
  • Designed for easy installation
  • Approved for use with oxygen
  • Compact design especially for installation into safety cabinets for gas cylinders
  • Minimised pressure difference between left and right-hand side outlet pressure
  • Double-stage model: BE56-2U
Spectrocem Pressure control panel BE55-2U
Back to product selection
Datasheet
Product request
Spectrocem Pressure control panel BE56-2U
Product features
  • Double-stage wall- and cabinet-mounting stainless steel pressure control panels with automatic change-over function
  • For corrosive gases and gas mixtures with corrosive components up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2x2, 2x3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Double stage pressure control with 3 diaphragm-type pressure regulators with high control accuracy, anti-vibration device and inegrated relief valve
  • Designed for easy installation
  • Approved for use with oxygen
  • Compact design especially for installation into safety cabinets for gas cylinders
  • Minimised pressure difference between left and right hand side outlet pressure
  • Single-stage model: BE55-2U
Spectrocem Pressure control panel BE56-2U
Back to product selection
Datasheet
Product request
Spectrocem Tapping points EE55-1...4
Product features
  • Wall-mounting tapping points / outlet points
  • For corrosive and toxic gases and gas mixtures up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Regulator with high control accuracy and Hastelloy-diaphragm
  • Designed for easy installation
  • Approved for use with oxygen
  • Tapping point can be extended into multiple tapping points
  • Gas supply from top or bottom
Spectrocem Tapping points EE55-1...4
Back to product selection
Datasheet
Product request
Spectrocem High pressure panel BE50-2
Product features
  • Wall- and cabinet-mounting stainless steel high pressure panels
  • For corrosive gases and gas mixtures with corrosive components up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Modular design (to be extended to 2, 3 etc. cylinders)
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Pressure gauge (optional)
  • Suitable for ECD-applications
  • Designed for easy installation
  • Approved for use with oxygen
  • Suitable for inlet pressure values up to 300 bar
Spectrocem High pressure panel BE50-2
Back to product selection
Datasheet
Product request
Spectrocem Purge- and connection block SBE3
Product features
  • Purge- and connection block for use with high-purity, strongly corrosive or toxic gases in combination with an inert gas purge arrangement
  • Minimised purge volume of only 1,4 cm³
  • With integrated capillary tube (very short purge cycles)
  • Contaminated purge gas can be vented through waste gas valve without entering the downstream system
  • With non-return valve at the purge gas inlet and compression ring fittings
  • Available with pneumatic actuators (optional)
  • Available with pressure gauge (for low vapour pressure gases), pressure regulator (mounted onto the purge block) or for use with a pressure control panel (with pigtail)
  • Suitable for ECD applications
Spectrocem Purge- and connection block SBE3
Back to product selection
Datasheet
Product request
Spectrocem Extensions BE55+56-E
Product features
  • Extension modules for Spectrocem BE55 and 56 series pressure control panels
  • Laboratory-style design
  • Designed for easy installation
  • With filter at the inlet of the individual extension modules
Spectrocem Extensions BE55+56-E
Back to product selection
Datasheet
Product request
Spectrocem Purge units BE55+56-SP
Product features
  • Extension modules for purging with inert gas in Spectrocem BE55 and 56 series pressure control panels
  • Non-return valve in the inlet
  • Filter in the in- and outlet
  • Laboratory-style design
  • Handwheel with on/off position indicator
Spectrocem Purge units BE55+56-SP
Back to product selection
Datasheet
Product request
Spectrocem Cylinder pressure regulator FE121
Product features
  • Single-stage cylinder pressure regulator
  • Simple and safe gas withdrawal from gas cylinders, for corrosive gases and gas mixtures up to quality 6.0 up to 25 bar vapour pressure
  • For corrosive gases and gas mixtures with >1% corrosive components we recommend the use of a purging device (FE 121 SP)
  • New laboratory-style design
  • Ergonomically designed
  • Filter at the regulator inlet
  • High control accuracy due to large diaphragm
  • Integrated relief valve
  • Available with purge device FE 121 SP
  • Simple outlet pressure limitation by handwheel
  • Powder-coated bonnet
Spectrocem Cylinder pressure regulator FE121
Back to product selection
Datasheet
Product request
Spectrocem Control valve RV6E
Product features
  • Stainless steel control valve for withdrawal from gas cylinders up to 40 bar
  • For corrosive, toxic gases and gas mixtures up to quality 6.0
  • New laboratory-style design
  • Ergonomically designed
  • Metal-to-metal seal to atmosphere
Spectrocem Control valve RV6E
Back to product selection
Datasheet
Product request
Spectrocem Pressure control panel SE45/55/125
Product features
  • Pressure control panel for use on gas cylinders with gases or gas mixtures with corrosive or toxic components, where the presence of ambient air (especially humidity or oxygen) would be harmful to hardware and/or the process
  • Laboratory-style design
  • Ergonomically designed
  • Regulator with Hastelloy-diaphragm (SE55 with tied diaphragm / positive seal and SE125)
  • Diaphragm-type shut-off valves optimised for for low internal volume with On/Off position indicator (SE45)
  • Suitable for ECD-applications
  • Regulator with high control accuracy and integrated relief valve (SE55 and SE125)
  • 3-way purge/connection block with integrated purge gas capillary tube and cylinder connection with the following control functions: purge gas inlet, purge/waste gas outlet and process gas outlet
Spectrocem Pressure control panel SE45/55/125
Back to product selection
Datasheet
Product request
Spectrocem Control valve RV6E
Product features
  • Stainless steel control valve for withdrawal from gas cylinders up to 40 bar
  • For corrosive, toxic gases and gas mixtures up to quality 6.0
  • New laboratory-style design
  • Ergonomically designed
  • Metal-to-metal seal to atmosphere
Spectrocem Control valve RV6E
Back to product selection
Datasheet
Product request
Spectrocem Tapping points EE55-1...4
Product features
  • Wall-mounting tapping points / outlet points
  • For corrosive and toxic gases and gas mixtures up to quality 6.0
  • Laboratory-style design
  • Ergonomically designed
  • Filter at the process gas inlet valve
  • Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
  • Suitable for ECD-applications
  • Regulator with high control accuracy and Hastelloy-diaphragm
  • Designed for easy installation
  • Approved for use with oxygen
  • Tapping point can be extended into multiple tapping points
  • Gas supply from top or bottom
Spectrocem Tapping points EE55-1...4
Back to product selection
Datasheet
Product request
Spectropur Pressure control panel BE55/56-1-VCR
Product features
  • Pressure control panel for corrosive gases and gas mixtures with corrosive components from grade 6.0
  • Single- or dual-stage version
  • High control accuracy
  • Pressure regulator with tied diaphragm
  • Orbital welded VCR-connections
  • Pre-filter
  • Panel can be evacuated
  • Burst disc
  • Manual waste gas valve (HPV)
  • Manual process gas valve (HPI)
  • Stainless steel valves for manual or automatic (pneumatic) shut-off
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
Spectropur Pressure control panel BE55/56-1-VCR
Back to product selection
Datasheet
Product request
Spectropur Pressure control panel SP3
Product features
  • Pressure control panel for inert gases and ultra high purity gases from grade 6.0
  • SR: pigtail and single valves with manual waste gas valve (HPV) or pneumatic process gas valve (HPI)
  • Pre-filter
  • Pressure regulator with tied diaphragm
  • Burst disc
  • Stainless steel valves for manual and automatic (pneumatic) shut-off
  • Electropolished surfaces (gas wetted)
  • Clearly legible handwheel position indication (on/off)
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
  • Modular design with many options
Spectropur Pressure control panel SP3
Back to product selection
Datasheet
Product request
Spectropur Pressure control panel SP4
Product features
  • Pressure control panel for flammable gases and ultra high purity gases from grade 6.0
  • SBE: purge- and connection block or
  • SR: pigtail and single valves with manual waste gas valve (HPV), manual process gas valve (HPI) and manual purge gas valve (PGI)
  • Check valve to prevent process gas from flowing back into the purge gas line
  • Pre-filter
  • Pressure regulator with tied diaphragm
  • Burst disc
  • Stainless steel valves for manual or automatic (pneumatic) shut-off
  • Minimized purge volume (SBE)
  • Electropolished surfaces (gas wetted)
  • Clearly legible handwheel position indication (on/off)
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
  • Modular design with many options
Spectropur Pressure control panel SP4
Back to product selection
Datasheet
Product request
Spectropur Pressure control panel SP6
Product features
  • Pressure control panel for hazardous gases and ultra high purity gases from grade 6.0
  • SBE: purge- and connection block or
  • SR: pigtail and single valves with manual waste gas valve (HPV), manual process gas valve (HPI) and manual purge gas valve (PGI)
  • Check valve to prevent process gas from flowing back into the purge gas line
  • Pre-filter
  • Pressure regulator with tied diaphragm
  • Burst disc with burst disc monitoring
  • Leak test port for leak test or vacuum
  • Stainless steel valves for manual or automatic (pneumatic) shut-off
  • Minimized purge volume (SBE)
  • Electropolished surfaces (gas wetted)
  • Clearly legible handwheel position indication (on/off)
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
  • Modular design with many options
Spectropur Pressure control panel SP6
Back to product selection
Datasheet
Product request
Spectropur Tapping point EE55-1-VCR
Product features
  • Tapping point for corrosive gases and gas mixtures with corrosive components from grade 6.0
  • Laboratory-style design for easy installation
  • High control accuracy
  • Pressure regulator with tied diaphragm
  • Orbital welded VCR-connections
  • Tapping point can be evacuated
  • Manual process gas valve (TPI)
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
Spectropur Tapping point EE55-1-VCR
Back to product selection
Datasheet
Product request
Spectropur Point of use stick EES55-1-VCR
Product features
  • Point of use stick for corrosive gases and gas mixtures with corrosive components from grade 6.0
  • High control accuracy
  • Pressure regulator with tied diaphragm
  • Orbital welded VCR-connections
  • Point of use can be evacuated
  • Manual or pneumatic valve options: process gas inlet (TPI) / purge gas inlet (SPI) / purge gas vent (SPV) / process gas outlet (TPO)
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
Spectropur Point of use stick EES55-1-VCR
Back to product selection
Datasheet
Product request
Spectropur Purge block SBE3
Product features
  • Purge block for hazardous gases and ultra high purity gases from grade 6.0
  • Minimized purge volume of only 2,6 cm³
  • Capillary tube allows purging into the cylinder valve
  • Metal-to-metal seal to atmosphere
  • All gas-wetted parts made of stainless steel SS316L, Hastelloy C276 and PCTFE or PVDF respectively
  • Fully functional even when valves are evacuated
  • Minimum particle generation, as no parts are exposed to friction and no spring is in the gaswetted area
  • Embedded soft seat seal made of PCTFE permits frequent operation without loss of tightness
  • Modular design for easy replacement of internal parts
  • Clearly legible position indication (on/off)
  • Electro-polished surfaces (gas wetted)
  • 100 % Helium leak tested
  • Shorter purge cycles due to minimized dead space
  • Assembly in clean room class ISO 5.0
Spectropur Purge block SBE3
Back to product selection
Datasheet
Product request
Spectropur Purge- and connection block SBE/3-MV3
Product features
  • Minimized purge volume of only 1,4 cm³
  • The capillary tube allows purging into the cylinder valve
  • Metal-to-metal seal to atmosphere using metal diaphragms made of Hastelloy C276
  • All gas-wetted parts made of stainless steel SS 316L, Hastelloy C276, and PCTFE or PVDF respectively
  • Fully functional even when valves are evacuated
  • Minimum particle generation, as no parts are exposed to friction and no spring is in the gas wetted area
  • Embedded soft seat seal made of PCTFE or PVDF permits frequent operation without loss of tightness
  • Modular design for easy replacement of internal parts
  • Clearly legible position indication (on/off)
  • High surface quality
  • 100 % Helium-leak-tested
  • Assembly in cleanroom class ISO 5.0
  • Approved for the use with oxygen up to 250 bar
  • 2 versions: Inlet (gas cylinder) on the right or on the left side (process gas valve is always behind)
Spectropur Purge- and connection block SBE/3-MV3
Back to product selection
Datasheet
Product request
Spectropur Pressure control panel BE55/56-2-VCR
Product features
  • Pressure control panel for corrosive gases and gas mixtures with corrosive components from grade 6.0
  • Manual switchover for 2 gas sources
  • Single- or dual-stage version
  • High control accuracy
  • Pressure regulator with tied diaphragm
  • Orbital welded VCR-connections
  • Pre-filter
  • Panel can be evacuated
  • Burst disc
  • Manual waste gas valve (HPV)
  • Manual process gas valve (HPI)
  • Stainless steel valves for manual or automatic (pneumatic) shut-off
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
Spectropur Pressure control panel BE55/56-2-VCR
Back to product selection
Datasheet
Product request
Spectropur Tapping point EE55-1-VCR
Product features
  • Tapping point for corrosive gases and gas mixtures with corrosive components from grade 6.0
  • Laboratory-style design for easy installation
  • High control accuracy
  • Pressure regulator with tied diaphragm
  • Orbital welded VCR-connections
  • Tapping point can be evacuated
  • Manual process gas valve (TPI)
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
Spectropur Tapping point EE55-1-VCR
Back to product selection
Datasheet
Product request
Spectropur Point of use stick EES55-1-VCR
Product features
  • Point of use stick for corrosive gases and gas mixtures with corrosive components from grade 6.0
  • High control accuracy
  • Pressure regulator with tied diaphragm
  • Orbital welded VCR-connections
  • Point of use can be evacuated
  • Manual or pneumatic valve options: process gas inlet (TPI) / purge gas inlet (SPI) / purge gas vent (SPV) / process gas outlet (TPO)
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
Spectropur Point of use stick EES55-1-VCR
Back to product selection
Datasheet
Product request
Spectropur Purge block SBE3
Product features
  • Purge block for hazardous gases and ultra high purity gases from grade 6.0
  • Minimized purge volume of only 2,6 cm³
  • Capillary tube allows purging into the cylinder valve
  • Metal-to-metal seal to atmosphere
  • All gas-wetted parts made of stainless steel SS316L, Hastelloy C276 and PCTFE or PVDF respectively
  • Fully functional even when valves are evacuated
  • Minimum particle generation, as no parts are exposed to friction and no spring is in the gaswetted area
  • Embedded soft seat seal made of PCTFE permits frequent operation without loss of tightness
  • Modular design for easy replacement of internal parts
  • Clearly legible position indication (on/off)
  • Electro-polished surfaces (gas wetted)
  • 100 % Helium leak tested
  • Shorter purge cycles due to minimized dead space
  • Assembly in clean room class ISO 5.0
Spectropur Purge block SBE3
Back to product selection
Datasheet
Product request
Spectropur Purge- and connection block SBE/3-MV3
Product features
  • Minimized purge volume of only 1,4 cm³
  • The capillary tube allows purging into the cylinder valve
  • Metal-to-metal seal to atmosphere using metal diaphragms made of Hastelloy C276
  • All gas-wetted parts made of stainless steel SS 316L, Hastelloy C276, and PCTFE or PVDF respectively
  • Fully functional even when valves are evacuated
  • Minimum particle generation, as no parts are exposed to friction and no spring is in the gas wetted area
  • Embedded soft seat seal made of PCTFE or PVDF permits frequent operation without loss of tightness
  • Modular design for easy replacement of internal parts
  • Clearly legible position indication (on/off)
  • High surface quality
  • 100 % Helium-leak-tested
  • Assembly in cleanroom class ISO 5.0
  • Approved for the use with oxygen up to 250 bar
  • 2 versions: Inlet (gas cylinder) on the right or on the left side (process gas valve is always behind)
Spectropur Purge- and connection block SBE/3-MV3
Back to product selection
Datasheet
Product request
Spectropur Pressure control panel BE55/56-2U-VCR
Product features
  • Pressure control panel for corrosive gases and gas mixtures with corrosive components from grade 6.0
  • Automatic switchover for 2 gas sources
  • Single- or dual-stage version
  • High control accuracy
  • Pressure regulator with tied diaphragm
  • Orbital welded VCR-connections
  • Pre-filter
  • Panel can be evacuated
  • Burst disc
  • Manual waste gas valve (HPV)
  • Manual process gas valve (HPI)
  • Stainless steel valves for manual or automatic (pneumatic) shut-off
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
Spectropur Pressure control panel BE55/56-2U-VCR
Back to product selection
Datasheet
Product request
Spectropur Tapping point EE55-1-VCR
Product features
  • Tapping point for corrosive gases and gas mixtures with corrosive components from grade 6.0
  • Laboratory-style design for easy installation
  • High control accuracy
  • Pressure regulator with tied diaphragm
  • Orbital welded VCR-connections
  • Tapping point can be evacuated
  • Manual process gas valve (TPI)
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
Spectropur Tapping point EE55-1-VCR
Back to product selection
Datasheet
Product request
Spectropur Point of use stick EES55-1-VCR
Product features
  • Point of use stick for corrosive gases and gas mixtures with corrosive components from grade 6.0
  • High control accuracy
  • Pressure regulator with tied diaphragm
  • Orbital welded VCR-connections
  • Point of use can be evacuated
  • Manual or pneumatic valve options: process gas inlet (TPI) / purge gas inlet (SPI) / purge gas vent (SPV) / process gas outlet (TPO)
  • 100 % Helium leak tested
  • Assembly in clean room class ISO 5.0
Spectropur Point of use stick EES55-1-VCR
Back to product selection
Datasheet
Product request
Spectropur Purge block SBE3
Product features
  • Purge block for hazardous gases and ultra high purity gases from grade 6.0
  • Minimized purge volume of only 2,6 cm³
  • Capillary tube allows purging into the cylinder valve
  • Metal-to-metal seal to atmosphere
  • All gas-wetted parts made of stainless steel SS316L, Hastelloy C276 and PCTFE or PVDF respectively
  • Fully functional even when valves are evacuated
  • Minimum particle generation, as no parts are exposed to friction and no spring is in the gaswetted area
  • Embedded soft seat seal made of PCTFE permits frequent operation without loss of tightness
  • Modular design for easy replacement of internal parts
  • Clearly legible position indication (on/off)
  • Electro-polished surfaces (gas wetted)
  • 100 % Helium leak tested
  • Shorter purge cycles due to minimized dead space
  • Assembly in clean room class ISO 5.0
Spectropur Purge block SBE3
Back to product selection
Datasheet
Product request
Spectropur Purge- and connection block SBE/3-MV3
Product features
  • Minimized purge volume of only 1,4 cm³
  • The capillary tube allows purging into the cylinder valve
  • Metal-to-metal seal to atmosphere using metal diaphragms made of Hastelloy C276
  • All gas-wetted parts made of stainless steel SS 316L, Hastelloy C276, and PCTFE or PVDF respectively
  • Fully functional even when valves are evacuated
  • Minimum particle generation, as no parts are exposed to friction and no spring is in the gas wetted area
  • Embedded soft seat seal made of PCTFE or PVDF permits frequent operation without loss of tightness
  • Modular design for easy replacement of internal parts
  • Clearly legible position indication (on/off)
  • High surface quality
  • 100 % Helium-leak-tested
  • Assembly in cleanroom class ISO 5.0
  • Approved for the use with oxygen up to 250 bar
  • 2 versions: Inlet (gas cylinder) on the right or on the left side (process gas valve is always behind)
Spectropur Purge- and connection block SBE/3-MV3
Back to product selection
Datasheet
Product request

Form

Hardware Selector Conatct Form Hubspot

There has been an error processing your registration. Please double-check the information entered.
By clicking I accept the GDPR policy of Messer SE & Co. KGaA. This agreement can be revoked at any time

Equipment Main Page

SPECIALTY GAS EQUIPMENT

Cylinder pressure regulators and gas supply systems for specialty gases