Breadcrumb

revised: Customer process assembly of the superstructure in the Shipbuilding sector

Assembly of the superstructure

in Shipbuilding

PROCESS DESCRIPTION

In the case of cruise liners, aluminium superstructures are also installed. Sections made from this material have a weight advantage and enable higher superstructures than comparable ones made of steel. Thus, larger ships can be built, allowing larger numbers of passengers. The welding and cutting processes used to make the sections are similar for both aluminium and steel. However, the welding processes with aluminium require the use of inert gases. Thus, arc welding methods such as MSG welding (here, MIG welding) or laser beam welding are applicable, but not gas welding or flame cutting.

 

revised: Application technology assembly of the superstructure in the Shipbuilding sector

Assembly of the superstructure

Total gas supply concept

Asset Publisher

Calibration Gases - Introduction 1

The highest demands apply to gas mixtures when they are used for the operation of sensitive analytical instruments in quality assurance, safety technology, emission or environmental monitoring. All...

Calibration Gases - Introduction 2b

The ISO 17025 specifies the general requirements for the competence of testing and calibration laboratories. For example, a laboratory accredited according to ISO 17025 has proven its competence to...

Calibration Gases Mixture Categories

Type Uncertainty % rel. Tolerance % rel. Concentration Stability Tecline no certificate ...

CANgas Introduction 2

Test gases are used, for example, for inspection of sensors that monitor the threshold values of toxic and flammable gases in hazardous areas or raise the alarm when environmentally hazardous...

Gas Mixture Configurator

MY GAS MIXTURE Design and request your individual gas mixture ...

CANgas - Contact Form

Back 20 Aug, 2021 Request pressure can ...

Calibration gas - Asset Page

Back 20 Aug, 2021 my Gas Mixture - Calibration gas Configurator ...

CANgas Aerosol Canisters

Aerosol canisters are particularly lightweight. They are suitable for up to 12 liters (gas content) of non-toxic and non-corrosive pure gases or gas mixtures. Aerosol canisters have a built-in...

CANgas High Pressure Canisters

High pressure canisters with a capacity of 34, 58 and 110 liters of gas are also available. They are suitable for toxic and corrosive pure gases and gas mixtures. The built-in shut-off valve is...

CAN gas

centralcontent

CANgas Introduction

High purity gases and gas mixtures are commonly manufactured in 10 or 50-liter steel or aluminum cylinders. For many applications, these delivery forms have proven to be the best solution with...

Contact form for every page

Contact us select action ...

Contact form for every page

Contact us

select action

Form

Action Form 3

There has been an error processing your registration. Please double-check the information entered.
By clicking I accept the GDPR policy of Messer SE & Co. KGaA. This agreement can be revoked at any time
Text to Identify Refresh CAPTCHA